Computer failure is a very troublesome thing, whether it is restarting or daily use, the computer blue screen will appear. When encountering different problems, there will be different blue screen prompts. Users can roughly understand the cause of the fault according to the prompts, and find solutions based on this. Many friends encountered the prompt Your PC ran into a problem and needs to restart. We're just collecting some errorinfo, and then you can restart(0% complete)
1. Check whether the hard disk is damaged, remove the hard disk from the computer, and try to replace it with a new machine. If it starts normally, it means that there is no problem with the hard disk. Otherwise, you need to check whether it is a memory problem.
2. Check the memory stick;
My own computer is relatively old and the configuration is low. I want to add a 4G memory to increase the loading speed of the computer. It took a while to plug in the sliver and everything was normal, but suddenly there was a problem yesterday, the system booted into Win7, when the Windows icon appeared, it couldn’t be read, and it was repeated. Try a single root memory, the old memory is normal before, it can enter the system, and the operation is normal. The newly purchased memory still has the above problem. When the Windows icon appears, it does not move and restarts. Tried all memory slots to rule out slot problems.
1> It may be because the time has passed, the gold-plated layer on the surface of the gold finger of the memory stick is oxidized, and the contact is poor. The oxide layer on the surface can be cleaned by wiping with an eraser. The eraser contains soft sand with very fine particles, and it will not damage the gold finger coating, so that it can be restored to a new one.
2> In addition, you can use alcohol to wipe. If there is no alcohol, you can also use high-strength white wine. Use medical pure cotton to dip in alcohol to wipe gently, and the effect is almost the same.
Tried the above method, finally back to normal.
